WESM zl Management and Configuration Guide WT.01.28 and greater

2-92
Configuring the ProCurve Wireless Edge Services zl Module
System Maintenance
3. In the Target section, specify the destination. Choose a destination from the To
drop-down menu:
• Wireless Services Module—copy the file to another location on the module
• Server—copy the file to an external FTP or TFTP server
• Local Disk—copy the file to the workstation on which you are running the
Web browser
The Target fields below change depending on the target type. The following three
sections give you guidelines for filling in the necessary information.
Copying a File to the Wireless Edge Services zl Module. You can copy a file on
the Wireless Edge Services zl Module to an new location on the module. For example,
you might want to copy a logo used for Web-Auth on one WLAN to another WLAN.
Follow these steps:
1. Complete steps 1 to 3 in “Transferring Configuration Files from the Wireless
Edge Services zl Module to Another Destination” on page 2-91.
2. In the File field, enter the name that you want to give to the configuration file.
The filename should include the path for the location in the module’s memory
to which you want to save the file.
3. You can use the Browse button to search the module’s directory and even create
a new folder for the file. See “Managing the Directory Structure and Browsing
for Files” on page 2-94 for more information.
4. Click the Transfer button. In the Status section at the bottom of the screen, a
message is displayed, reporting whether the transfer was successful.