WESM zl Management and Configuration Guide WT.01.28 and greater

2-110
Configuring the ProCurve Wireless Edge Services zl Module
SNMP Traps and Error Reporting
Modifying SNMP v2 Communities
By default, the Wireless Edge Services zl Module names the read-only community
“public” and the read-write community private. To change the community name or
access control setting for these communities, complete these steps:
1. Select Management > SNMP Access > v1/v2c.
Figure 2-67. Management > SNMP Access > V1/V2c Screen
2. Select the community that you want to modify, and then click the Edit button.
The Edit SnmpV1/V2c screen is displayed. (See Figure 2-68.)