WESM zl Management and Configuration Guide WT.01.28 and greater

2-112
Configuring the ProCurve Wireless Edge Services zl Module
SNMP Traps and Error Reporting
Figure 2-69. Management > SNMP Access > Statistics Screen
SNMP Traps
To generate alarm logs, you must enable the Wireless Edge Services zl Module to
generate SNMP traps, and you must enable specific SNMP traps. For example, you
may want the module to generate an alarm if file system space becomes low or if a
user fails to authenticate.
After you enable the SNMP trap function and the specific traps you want, the Wireless
Edge Services zl Module will begin to log events that match the SNMP traps you
have enabled. In addition to viewing these logs through the Web browser interface,
you can configure the Wireless Edge Services zl Module to send the SNMP trap
information to your SNMP server. (For information about viewing logs through the
Web browser interface, see “Configuring Logging” on page 12-64 in Chapter 12:
“Wireless Network Management.”)