WESM zl Management and Configuration Guide WT.01.28 and greater

2-113
Configuring the ProCurve Wireless Edge Services zl Module
SNMP Traps and Error Reporting
Enabling SNMP Traps
By default, all SNMP traps are disabled. To enable SNMP traps, complete thesesteps:
1. Select Management > SNMP Trap Configuration and click the Configuration tab.
Figure 2-70. Management > SNMP Trap Configuration Screen
The SNMP traps for the Wireless Edge Services zl Module are divided into the
following categories:
• Redundancy
• Miscellaneous
•NSM
• Mobility