WESM zl Management and Configuration Guide WT.01.28 and greater

2-114
Configuring the ProCurve Wireless Edge Services zl Module
SNMP Traps and Error Reporting
• DHCP
•Radius
•SNMP
•Wireless
2. Check the Allow Traps to be generated box.
3. To view the SNMP traps in a category, click the Plus ( + ) sign next to the
category. To view the SNMP traps in all categories, click the Expand all items
button.
4. To enable all the traps, select All Traps and click the Enable all sub-items button.
5. To enable all the SNMP traps in a category, select the category and click the
Enable all sub-items button.
6. To enable a specific SNMP trap, select the trap and click the Enable button or
double-click the trap. A green check mark is displayed next to enabled traps. A
red x is displayed next to disabled traps.