WESM zl Management and Configuration Guide WT.01.28 and greater

2-121
Configuring the ProCurve Wireless Edge Services zl Module
SNMP Traps and Error Reporting
View Information about SNMP Receivers. After you define an SNMP server, the
server is displayed in the Management > SNMP Trap Receivers screen.
Figure 2-77. Management > SNMP Trap Receivers Screen
You can view the following information about that server:
■ Destination Address—the IP address of the SNMP server
■ Port—the port number that the module uses to communicate with the SNMP
server. By default, the module uses port 162.
■ Community String/User Name—the community string for the trap. Receivers are
automatically assigned to the public community.
■ Retry Count—the number of times that the Wireless Edge Services zl Module
will try to contact the SNMP server
■ Timeout—the number of seconds that the Wireless Edge Services zl Module
waits for a response from the SNMP server before ending the session
■ Trap Version—the version of the SNMP trap sent to the SNMP server