WESM zl Management and Configuration Guide WT.01.28 and greater

2-122
Configuring the ProCurve Wireless Edge Services zl Module
Radio Port Licenses
Edit an SNMP Trap Receiver. If you define an SNMP trap receiver and later need
to change its IP address, complete these steps:
1. Select Management > SNMP Trap Receivers.
2. Click the Edit button.
3. You can change these settings:
• IP address
• port
To change the SNMP version, you must delete the receiver from the Manage-
ment > SNMP Trap Receivers screen and re-add it with the correct version.
4. Click the OK button.
5. Click the Save link at the top of the Web browser interface to save the changes
to the startup-config.
Radio Port Licenses
Each Wireless Edge Services zl Module (J9051A) ships with 12 nonremovable RP
licenses. When you install the Wireless Edge Services zl Module into a switch, the
module can automatically adopt up to 12 RPs. If you move the Wireless Edge
Services zl Module to another switch, these 12 RP licenses move with the module.
They cannot be uninstalled or transferred to another Wireless Edge Services zl
Module.
If you want to manage more than 12 RPs through a Wireless Edge Services zl Module,
you can purchase and install additive licenses. You can purchase two types of additive
licenses:
■ a license which allows the Wireless Edge Services zl Module to adopt 12
additional RPs
■ a license which allows the Wireless Edge Services zl Module to adopt 48
additional RPs
You can install multiple licenses; the Wireless Edge Services zl Module can adopt a
maximum of 156RPs. Because each RP has a maximum of two radios, each Wireless
Edge Services zl Module can manage up to 312 radios. Typically, you would add
12 RP Licenses when your module must support fewer than 60 RPs. If the module
must support more than 60 RPs, install up to three 48 RP Licenses. (See Table 2-8.)