WESM zl Management and Configuration Guide WT.01.28 and greater

2-132
Configuring the ProCurve Wireless Edge Services zl Module
Radio Port Licenses
d. In the Step 1—Generate Hardware ID section, click the Gen-Hw-ID button.
e. When a number is displayed in the System Generated Hardware Id field,
copy it
(using Ctrl-C) or write it down. (Copying the number is easier and
more accurate.)
You must enter this number on the My ProCurve Web portal.
7. Return to the My ProCurve Web portal. In the Enter Hardware ID# field, paste
(using Ctrl-V) or enter the hardware ID.
8. Enter notes in the Customer Notes field. This field is optional. For example, you
might want to enter a short description that explains where this Wireless Edge
Services zl Module is located. These notes are stored, along with the registration
ID number, in your account on the My ProCurve Web portal.
9. Click the Next button. The License Agreement page is displayed.
10. Read the license terms. If you agree to these terms, check the I agree to the
license terms box.
11. Click the Generate License button. The My ProCurve Web portal generates a
license key and displays it on the License Key Confirmation page. In addition,
the portal emails you the license key.
12. Copy the license key (Ctrl-C) from the screen or write it down.
13. Return to the Install License (Step 1 and Step 2) screen in the Web browser
interface for the Wireless Edge Services zl Module.
14. In the Step 2—Install License Key section, enter the license key and click the
Lic-Install button. A message confirms a successful installation or identifies a
problem that prevented the license from installing.
15. If you have successfully installed the license, click the Close button. The new
license is now listed on the Management > Licenses screen.
Removing RP Licenses
If you want to transfer the Wireless Services Module 12 RP License or 48RP License
from one Wireless Edge Services zl Module to another, you must first access the Web
interface browser and uninstall the license. During this process, the module generates
an uninstall verification key. You must copy or record this key so that you can enter
it on the My ProCurve Web portal. The Web portal, in turn, uses this key to generate
a new verification key, which you can use to install the license on the new Wireless
Edge Services zl Module.
To simplify the process of uninstalling a license, you may want to use two Web
browsers as you complete these steps:
1. Access the Web browser interface for the Wireless Edge Services zl Module.