WESM zl Management and Configuration Guide WT.01.28 and greater

2-136
Configuring the ProCurve Wireless Edge Services zl Module
Setting System Information— Name, Time, and Country Code
Figure 2-87. Network Setup Screen
Follow these steps to configure the system information, which the Wireless Edge
Services zl Module reports to an SNMP server:
1. Name module by entering a string in the System Name field.
The string can include spaces and special characters.
The default name is “Wireless Services.” Note that, by default, RPs send DNS
requests for “Wireless Services” when attempting to be adopted at Layer 3. See
“Enabling Layer 3 Adoption Through DNS Lookup” on page 2-67 to learn how
to change the name that RPs request.
2. Enter a string in the Location field to identify where the module is installed.
3. Enter a string in the Contact field to identify the person responsible for managing
this module.
4. Click the Apply button.
Follow these steps to configure the internal clock manually:
1. Enter the current date in the Date field.