WESM zl Management and Configuration Guide WT.01.28 and greater

2-143
Configuring the ProCurve Wireless Edge Services zl Module
Enabling Secure Network Time Protocol (NTP)
Configuring Secure NTP Options
To configure a Secure NTP server, complete these steps:
1. Select Special Features > Secure NTP > Configuration.
Figure 2-89. Special Features > Secure NTP > Configuration Screen
2. Optionally, in the Other Settings section, check the Authenticate Time Sources
box.
This setting requires the Wireless Edge Services zl Module to include a credential
authentication step when communicating with its neighbors and clients. See
“Configuring Authentication for Secure NTP” on page 2-147.
3. Optionally, check the Act as NTP Master Clock box to specify that the module
use its internal clock to act as the master clock.
If you enable your module to act as the master clock, it can serve the time whether
or not it receives the time from another server or peer.