WESM zl Management and Configuration Guide WT.01.28 and greater

2-148
Configuring the ProCurve Wireless Edge Services zl Module
Enabling Secure Network Time Protocol (NTP)
Figure 2-91. Enabling Auto Key for Secure NTP
3. In the Auto Key field, use the drop-down menu to enable auto key:
• Host Enabled—The Wireless Edge Services zl Module requires clients and
neighbors to use auto key to authenticate themselves.
• Client only Enabled—The module uses auto key only to authenticate itself
to a server.
4. Click the Apply button.
5. To enable the module to use auto key with a particular neighbor, follow these
steps:
a. Click the Neighbor tab.
b. Select the neighbor and click the Edit button. (Or, add a new neighbor. See
“Configuring NTP Neighbors” on page 2-150.)
c. Select AutoKey Authentication.
d. Click the OK button.