WESM zl Management and Configuration Guide WT.01.28 and greater

2-152
Configuring the ProCurve Wireless Edge Services zl Module
Enabling Secure Network Time Protocol (NTP)
Figure 2-95. Add Neighbor Screen
3. Select the neighbor type:
• Peer—A peer is another NTP server in a close relationship with your
Wireless Edge Services zl Module. The module synchronizes with its peers,
and at any given moment, only one peer in the group acts as the NTP server.
• Server—Select this type if the NTP neighbor is a server to which the
Wireless Edge Services zl Module’s acts as a client.
• Broadcast Server—Instead of adding a neighbor, selecting this option
actually configures the module itself to act as a broadcast server. See
“Configuring the Wireless Edge Services zl Module as a Broadcast Server”
on page 2-153.
4. To specify the IP address or hostname of the neighbor, do one of the following:
•Click IP Address and enter the IP address of the peer or server.
•Click Hostname to enter the fully qualified domain name (FQDN) of the
peer or server.