WESM zl Management and Configuration Guide WT.01.28 and greater

2-156
Configuring the ProCurve Wireless Edge Services zl Module
Enabling Secure Network Time Protocol (NTP)
7. If you selected Symmetric Key Authentication in step 6, in the Key ID field, enter
the symmetric key ID.
The key ID references the symmetric key that you created earlier. (See “Adding
Symmetric Keys” on page 2-149). You must configure clients in this network to
match the key referenced by the ID.
8. Click the OK button. The broadcast server is now listed on the Special Features
> Secure NTP > NTP Neighbor screen.
Viewing NTP Associations and Status
The interaction between the Wireless Edge Services zl Module and an NTP resource
(typically, one of the module’s neighbors) constitutes an association. As described in
“Configuring NTP Neighbors” on page 2-150, associations come in two modes:
■ Peer association—The module synchronizes to the resource or allows the
resource to synchronize to it.
■ Server association—Only the module synchronizes to the other resource, which
is the NTP server.
To view your NTP associations, select Special Features > Secure NTP and click the
NTP Associations tab.