WESM zl Management and Configuration Guide WT.01.28 and greater

1-9
Introduction
ProCurve Wireless Edge Services zl Module
Figure 1-1. Auto-Provisioned Radio Port VLANs
Note If, for whatever reason, you do not want an RP placed in the default Radio Port
VLAN, you can manually create a different Radio Port VLAN on the wireless
services-enabled switch. (In this case, you should turn off auto-provisioning.) The
instructions in “Manually Establishing a Radio Port VLAN” on page 1-9 apply to a
wireless services-enabled switch as well as to an infrastructure switch.
However, take care never to tag the same VLAN on the uplink and downlink port.
Manually Establishing a Radio Port VLAN. If you connect an RP to an infra-
structure switch instead of directly connecting it to the wireless services-enabled
switch, you must manually establish the Radio Port VLAN on that infrastructure
switch.