WESM zl Management and Configuration Guide WT.01.28 and greater

2-174
Configuring the ProCurve Wireless Edge Services zl Module
Digital Certificates
• Use existing key—Use a key pair that you created previously; Select the
key from the drop-down menu.
• Create a new key—Create a new key pair for this certificate that you can
also use for future certificates.
–In the Key Label field, enter a name for the key.
–In the Key Size field, enter the key size, from 1,024 through 2,048 bytes.
Note You can also create keys in a separate procedure; see “Creating a Key” on page 2-186
for information.
6. Click the Next button. The screen shown in Figure 2-106 is displayed.
Figure 2-106.Certificate Credentials Screen (Certificate Request)
7. Check the Configure the trustpoint box and enter the following credentials for
the certificate: