WESM zl Management and Configuration Guide WT.01.28 and greater

2-180
Configuring the ProCurve Wireless Edge Services zl Module
Digital Certificates
You can select either or both certificates to upload. However, you can only upload
a certain type of certificate if the selected trustpoint does not already include that
type. If you want to upload a new certificate, first delete the current certificate.
See “Deleting Trustpoints, Certificates, and Keys” on page 2-180.
4. For each certificate that you will upload, specify the certificate file source:
To upload the certificate from an external server, follow these steps:
i. In the From drop-down menu, select Server.
ii. In the File field, enter the name of the certificate as stored on the server.
iii. Choose FTP or TFTP from the Using drop-down menu, and, if necessary
choose the port for your server. (The default port is usually correct.)
iv. Specify the server’s IP address.
v. For FTP, enter the username and password.
vi. Leave the Path field blank if the file is in the server’s base directory.
Or enter a valid directory path on the server.
To upload the certificate from the workstation running the Web browser,
follow these steps:
i. In the From drop-down menu, select Local Disk.
ii. In the File field, enter the certificate filename with a valid path. For
example: C:/mycert.der. Alternatively, click the browse button and
browse for the certificate.
5. Click the Next button. The completion screen summarizes the certificate upload
operation that you have performed.
6. Click the Finish button.
Deleting Trustpoints, Certificates, and Keys
To delete selected trustpoints, certificates, and keys using the Certificates Wizard,
complete these steps:
1. On the Certificates Wizard Welcome screen, in the Select a certificate operation
section, click Delete Operations.