WESM zl Management and Configuration Guide WT.01.28 and greater

2-183
Configuring the ProCurve Wireless Edge Services zl Module
Digital Certificates
5. On the confirmation screen, click the Next button to confirm the deletion. Or,
click the Cancel button to cancel the deletion.
6. After the deletion is complete, on the completion screen that is displayed, click
the Finish button.
7. Click the Save link at the top of the Web browser interface to save the changes
to the startup-config.
Uploading a CRL to a Trustpoint
If you have created a trustpoint based on an external CA, you should upload the CA’s
CRL to the trustpoint. The CRL lists certificates that the CA issued but has since
revoked. You configure the location to which the CA publishes the CRL, and the
Wireless Edge Services zl Module periodically checks this location for the most
recent CRL.
Use this command, entered from the global configuration mode context:
ProCurve(wireless-services-C)# crypto pki import <trustpoint name> crl <URL>
<hours>
Replace <trustpoint name> with the name of the trustpoint to which you want to
save the CRL. You can enter the URL as a reference to an HTTP publication point
or a file on an FTP or TFTP server. For FTP and TFTP servers, include the filename,
path, and (for FTP) login information. For <hours> enter a value from 1 to 168 to
set how often the module updates the CRL.
Transferring Trustpoints
You can transfer trustpoints either:
■ from the Wireless Edge Services zl Module to an FTP or TFTP server
■ from a server to the Wireless Edge Services zl Module
You can transfer trustpoints to a secure location for archiving. Transferring trustpoints
to an external server is recommended to ensure that server certificate information is
available if problems are encountered with the Wireless Edge Services zl Module.
You can also transfer an entire trustpoint to the module. For example, you might want
to move a trustpoint from one module to another. You would save the trustpoint on
the first module out to an external server and then transfer the trustpoint from the
external server to the second module.
When you transfer a trustpoint, you copy these elements (if included in that particular
trustpoint):