WESM zl Management and Configuration Guide WT.01.28 and greater

2-188
Configuring the ProCurve Wireless Edge Services zl Module
Digital Certificates
Figure 2-115.Add Key Screen
3. In the Key Name field, enter a name for the key.
Enter between 2 and 64 characters. The only permissible special character is “_”.
4. In the Key Size field, enter the key size, from 1,024 through 2,048 bytes.
5. Click the OK button.
Transferring Keys
You can transfer key pairs to a secure location for archiving. Transferring keys is
recommended to ensure that server certificate key information is available if prob-
lems are encountered with the switch and this data needs to be retrieved. Also, if you
transfer a trustpoint to a different device, the device requires the associated key pair.
You can transfer keys either:
■ from the Wireless Edge Services zl Module to an FTP server, a TFTP, or the
local disk of the workstation running the Web browser
■ from an external server or the local disk to the Wireless Edge Services zl Module
Transferring Keys from the Wireless Edge Services zl Module to a Server or
Local Disk. To transfer a key from the Wireless Edge Services zl Module to either
an FTP or TFTP server or a local disk, complete these steps:
1. Select Management > Server Certificates and click the Keys tab
2. Click the Transfer Keys button. The Transfer Keys screen is displayed.
3. In the Source section, in the From field, use the drop-down menu to select
Wireless Services Module.