WESM zl Management and Configuration Guide WT.01.28 and greater

2-189
Configuring the ProCurve Wireless Edge Services zl Module
Digital Certificates
Figure 2-116.Transfer Keys from Wireless Edge Services zl Module
4. Use the next drop-down menu to select the key to be transferred.
5. In the Pass phrase field, enter a passphrase, which can include spaces and special
characters.
The passphrase encrypts the key pair, and, although optional, is recommended
for security. In order to decrypt and use the key, a person must know the correct
passphrase.
6. In the Target section, from the To drop-down menu, select the destination for the
key transfer, either Server or Local Disk.
7. In the File field, enter the filename of the target key file. The default filename is
the name of the key being transferred.
8. If you specified a server target in step6, specify the following for the key transfer
target:
a. In the Using drop-down menu, select the protocol for the key transfer, either
FTP or TFTP.
b. In the Port field, enter the respective FTP or TFTP port number; the default
port number (port 21 for FTP, port 69 for TFTP) should apply in most cases.
c. In the IP Address field, enter the IP address of the FTP or TFTP server.
d. If you are using an FTP server, enter the login credentials.
i. In the User ID field, enter the username for your account on the FTP
server.