WESM zl Management and Configuration Guide WT.01.28 and greater

1-11
Introduction
ProCurve Wireless Edge Services zl Module
Although it is usually a good idea to use auto-provisioning on the wireless services-
enabled switch and to create the same Radio Port VLAN on the infrastructure
switches that directly connect to RPs, you can use any valid VLAN numbers for
Radio Port VLANs. Simply remember to tag the Wireless Edge Services zl Module’s
downlink port for that VLAN.
In Figure 1-3, the network administrator has decided to use VLAN 300 for one of
the RPs. (Although you typically place all RPs in the same VLAN, such a design is
not mandatory.)
Figure 1-3. Manually Creating Radio Port VLANs
Remember that the internal downlink port must always be tagged for the Radio Port
VLAN, while the external switch port that connects to the RP must always be
untagged.