WESM zl Management and Configuration Guide WT.01.28 and greater

2-190
Configuring the ProCurve Wireless Edge Services zl Module
Digital Certificates
ii. In the Password field, enter the password for this username.
e. In the Path field, enter the path where the key will be saved on the server.
(If you are using a TFTP server, this field may not be required.)
9. If you specified Local Disk in step 6, click the browse button to choose the
directory in which to save the key.
10. Click the Transfer button. In the Status section at the bottom of the screen, a
message is displayed, reporting whether the transfer was successful.
11. After the key transfer is complete, click the Close button.
Transferring Keys from a Server or Local Disk to the Wireless Edge Services zl
Module. To transfer a key from either a server or a local disk to the Wireless Edge
Services zl Module, complete these steps:
1. Select Management > Certificate Management and click the Keys tab
2. Click the Transfer Keys button. The Transfer Keys screen is displayed.
3. In the Source section, in the From field, use the drop-down menu to select either
Server or Local Disk.
Figure 2-117.Transfer Keys from Server or Local Disk
4. In the Key Name field, enter the filename of the source key file. If you selected
Local Disk as the source in step 3, include the path with the filename.