WESM zl Management and Configuration Guide WT.01.28 and greater

3-4
Radio Port Configuration
Country-Code and Regulatory Procedures
Country-Code and Regulatory Procedures
While IEEE has codified the international wireless network specifications and
standards, each country has its own regulations for legal frequencies and wireless use
requirements. It is important to be aware of your country’s standards when config-
uring your network.
Setting a device’s country code configures it to use radio settings that are legal in that
country. You must set the country code on your ProCurve Wireless Edge Services zl
Module before it will adopt RPs. Complete these steps:
1. Select Network Setup and click the Configuration tab.
2. In the Country field, use the drop-down menu to select your country. (See
Figure 3-1.)
3. Click the Apply button.
Figure 3-1. Configuring the Country Code