WESM zl Management and Configuration Guide WT.01.28 and greater

3-27
Radio Port Configuration
Configuring Radio Settings
To v iew the Configuration screen for a particular radio, complete these steps:
1. Select Network Setup > Radio and click the Configuration tab.
2. Select the radio that you want to configure and click the Edit button.
Like the default Configuration screen for a radio type, a particular radio’s Configu-
ration screen includes three sections: Properties, Radio Settings, and Advanced
Properties. These are described in the following sections.
Figure 3-11. Radio Configuration Properties
Configuring Properties
The Properties section on a radio’s Configuration screen differs from that in a radio
type’s default
Configuration screen: the radio’s reports more detailed information about
the specific radio, including the radio’s base MAC address, its radio type, and its index
type. In the
Properties section, you can set an appropriate description for this radio and
define the radio as a dedicated detector.
MAC Address
Radio Type
Index Type
Description
Detector
Unapproved APs