WESM zl Management and Configuration Guide WT.01.28 and greater

3-34
Radio Port Configuration
Configuring Radio Settings
3. In the Advanced Properties section, click the DTIM Periods button. The DTIM
Periods screen is displayed.
Figure 3-14. DTIM Periods
4. In the field for each BSS, enter the number of beacons between DTIMs.
5. Click the OK button.
Configuring Multiple Radios at Once
To save time, you can configure settings for multiple radios at once. Hold down <Ctrl>
as you select the radios and click the Edit button.
The Configuration screen is displayed. You can edit the configuration much as you
would for a single radio. However, certain parameters are grayed out; these param-
eters are restricted to configuration on one radio at a time. The restricted promontories
are:
■ channel setting
■ transmit power
■ short preamble requirement
If you have choose radios of both 802.11a and 802.11bg type, the restricted param-
eters are:
■ placement
■ channel setting
■ transmit power
■ rate settings
■ short preamble requirement