WESM zl Management and Configuration Guide WT.01.28 and greater

3-35
Radio Port Configuration
Configuring Radio Settings
For certain parameters, you can either edit the setting for all radios or allow each
radio to keep its current setting. These parameters are:
■ placement (for radios of the same type)
■ antenna mode
Other settings become identical for every selected radio after you click the OK button.
Running ACS
If you have configured one or more radios to use ACS, you can have the Wireless
Edge Services zl Module reinitiate the ACS process. Rerunning ACS after all RPs
are adopted helps the radios to select the actual channel with the least interference.
Complete these steps:
1. Select Network Setup > Radio > Configuration.
Figure 3-15. Running ACS on All RP Radios
2. Click the Tools button.
Running ACS is
one of the Tools