WESM zl Management and Configuration Guide WT.01.28 and greater

3-37
Radio Port Configuration
Configuring Radio Settings
Resetting a Radio
It may become necessary for you to reboot an RP. For a dual-radio RP (such as the
RP 220 or 230), you can either reset the entire RP or only one of its radios. Complete
these steps:
1. Select Network Setup > Radio and click the Configuration tab.
2. Select the radio that you want to reset and click the Tools button.
Figure 3-17. Resetting a Radio
3. On the pop-up menu that is displayed, select Reset. The Confirm Reset screen is
displayed.
Figure 3-18. Resetting a Radio
Reset Radio1