WESM zl Management and Configuration Guide WT.01.28 and greater

4-6
Wireless Local Area Networks (WLANs)
Configuration Options: Normal Versus Advanced Mode
Figure 4-2 shows the screen in which you can verify that radios have received the
WLAN assignment.
Figure 4-2. Assigning WLANs to a Radio (Normal)
To view the screen in Figure4-2, select Network Setup > Radio and click the WLAN
Assignment tab. Select a radio, and information is displayed in the area in the right
of the screen, called Assigned WLANs.
The Assigned WLANs area lists the four BSSIDs on the radio and the SSID (or SSIDs)
assigned to each BSSID. View this screen whenever you want to see exactly which
WLANs each RP radio in your wireless network supports.
Note that if the RP includes two radios, each WLAN is matched to corresponding
BSSIDs on each radio, as shown on the RP 230 in Figure 4-1. Figure 4-3 shows the
screen in the Web browser interface in which you can verify that radio 2 has also
received the WLAN configuration. (To view the SSID for both radios at the same
time, hold down the
Shift key and select the two.)