WESM zl Management and Configuration Guide WT.01.28 and greater

4-12
Wireless Local Area Networks (WLANs)
Configuration Options: Normal Versus Advanced Mode
Why Use Advanced Mode
Reasons that you might use advanced mode include:
■ You want to restrict access to a WLAN to a certain area.
For example, if a WLAN allows wireless users to access sensitive financial
information, you might not want your network to support that WLAN, even
protected by encryption, in a public lobby. Advanced mode allows you to assign
a WLAN to certain RPs only, so you control where the WLAN exists.
For example, in Figure 4-7, the administrator has assigned SSID A to the RP in
Building 2, and SSIDs B, C, and D to other RPs.
Figure 4-7. Restricting a WLAN to an Area
■ Your network includes more than four WLANs, and you want beacons to include
one of the WLANs with a higher index number.
In this case, you should assign the WLAN that you want RPs to beacon as the
primary WLAN on a specific BSSID.