WESM zl Management and Configuration Guide WT.01.28 and greater

4-24
Wireless Local Area Networks (WLANs)
Configuration Options: Normal Versus Advanced Mode
■ the radio adoption default configuration for 802.11bg radios
■ the configuration for every RP radio adopted by your module
To disable advanced mode configuration, complete these steps:
1. Click Network Setup > WLAN Setup.
2. Click the Global Settings button. The Global WLAN Settings screen is displayed.
3. Uncheck the Advanced Configuration box, and then click the OK button. The
screen shown in Figure 4-16 is displayed.
Figure 4-16. Disabling Advanced Configuration
4. Click the No button if you have verified that the WLAN assignment is compatible
with normal mode. This option disables advanced mode, but leaves currently
enabled WLANs active.
Caution Take care when selecting the button. Clicking the Yes button and clicking the No
button will both disable advanced mode. However, clicking the Yes button also
disables all WLANs.
If you click the No button but the WLAN assignment is incorrect, the screen
shown in Figure 4-17 is displayed.
Figure 4-17. Failing to Disable Advanced Configuration