WESM zl Management and Configuration Guide WT.01.28 and greater

4-27
Wireless Local Area Networks (WLANs)
Configuring a WLAN
Figure 4-18. Network Setup > WLAN Setup > Configuration Screen
As you can see in Figure4-18, this screen displays the 256 WLANs that are available
for configuration. Remember that in normal configuration mode, you can only
configure WLANs 1 through 16.
On the Wireless Edge Services zl Module, you do not create WLANs as such. The
module has already created them; you configure options for and enable the WLANs.
The default configuration for each WLAN is displayed in seven columns:
■ Index—Lists the WLANs by index number. Although you will create your own
name for the WLAN, this index number is important because it determines which
WLAN is the primary WLAN on a BSSID, if you enable more than four WLANs.
(By default, the WLAN on the BSSID with the lowest number is the primary
WLAN.)