WESM zl Management and Configuration Guide WT.01.28 and greater

4-36
Wireless Local Area Networks (WLANs)
Configuring a WLAN
Figure 4-23. Specifying 802.1X EAP Settings
a. Enter a value in the Station Timeout field to control how long the module
will wait for a station to authenticate itself.
The Station Timeout can be from 1 to 60 seconds, and the default setting is
5 seconds.
b. Enter a value in the Station Retries field to control how many times the
module will reissue a challenge to the station.
The setting for Station Retries can be from 1 to 10; the default setting is 3.
c. Click the OK button. You return to the WLAN’s Edit screen.
5. 802.1X requires a RADIUS server to act as the authentication server. Click the
Radius Config button at the bottom of the screen. The Radius Configuration
screen is displayed.