WESM zl Management and Configuration Guide WT.01.28 and greater

4-41
Wireless Local Area Networks (WLANs)
Configuring a WLAN
6. Leave other settings at their defaults and click the OK button.
7. Web-Auth requires a RADIUS server to act as the authentication server. Click
the Radius Config button at the bottom of the screen. The Radius Configuration
screen is displayed.
Figure 4-27. Radius Configuration Screen
8. In the Radius Configuration screen, under Server, specify settings for your
network’s RADIUS servers.
Enter settings for your primary server in the fields in the Primary column:
a. In the RADIUS Server Address field, specify the IP address of your network’s
primary RADIUS server.
To use the module’s internal server, enter 127.0.0.1.
b. Leave the RADIUS Port field at the default value unless you know that your
server uses a different port.