WESM zl Management and Configuration Guide WT.01.28 and greater

4-52
Wireless Local Area Networks (WLANs)
Configuring a WLAN
1. Access the Edit screen for the WLAN that is to use dynamic WEP:
a. Select Network Setup > WLAN Setup and click the Configuration tab.
b. Select the WLAN and click the Edit button. The Edit screen is displayed.
(See Figure 4-30.)
2. Enable 802.1X authentication and specify the RADIUS server. (See “802.1X
EAP” on page 4-34.)
3. On the WLAN’s Edit screen, under Encryption, check either the WEP 64 or
WEP 128 box, as shown in Figure 4-32.
Figure 4-32. Specifying WEP Encryption with 802.1X Authentication
(Dynamic WEP)