WESM zl Management and Configuration Guide WT.01.28 and greater

4-58
Wireless Local Area Networks (WLANs)
Configuring a WLAN
a. Select Network Setup > WLAN Setup and click the Configuration tab.
b. Select the WLAN and click the Edit button. The Edit screen is displayed.
(See Figure 4-30.)
2. Under Authentication, select No Authentication.
3. Under Encryption, select your encryption protocol:
• To use TKIP, check the WPA/WPA2-TKIP box.
The Wireless Edge Services zl Module and wireless stations will use TKIP
for all encryption. Note that both WPA and WPA2 stations can connect, but
WPA2 stations will use TKIP.
• To use AES, check the WPA2-AES box.
This option forces all wireless stations to use AES, the most secure algo-
rithm used for wireless encryption.
• To allow both protocols (mixed-mode), check both boxes.
4. Specify the preshared key that users must enter to connect to the WLAN.
a. Click the Config button next to the WPA encryption options. The WPA/
WPA2 screen is displayed.
Figure 4-36. Configuring a Key for WPA/WPA2 Encryption with No Authentication