WESM zl Management and Configuration Guide WT.01.28 and greater

4-60
Wireless Local Area Networks (WLANs)
Configuring a WLAN
Table 4-5. Encryption Options for RADIUS MAC Authentication
Configuring Encryption for a WLAN that Uses Web-Auth. Web-Auth occurs
after a station connects to the WLAN and, by itself, provides no encryption.
To protect the users’ data within the wireless network, you can add WEP or WPA/
WPA2 encryption. In this case, users must first enter a WEP or WPA key to connect
to the WLAN. Then, when they attempt to access a Web site, they must submit their
username and password for Web-Auth.
See “Web-Auth” on page 4-39 or Chapter 5: “Web Authentication for Mobile Users”
for instructions on configuring the authentication. After selecting Web-Auth in a
WLAN’s Edit screen, you have several choices for which boxes in the Encryption
section to check. Table 4-6 summarizes these options and refers you to section that
explains how to configure the second security option.
Encryption Option Security Option Reference
WEP 64 static WEP “Configuring Static WEP
Encryption (No
Authentication)” on
page 4-47
WEP 128 static WEP “Configuring Static WEP
Encryption (No
Authentication)” on
page 4-47
WPA/WPA2-TKIP WPA/WPA2-PSK “Configuring WPA/WPA2-
PSK” on page 4-57
WPA2-AES WPA2-PSK “Configuring WPA/WPA2-
PSK” on page 4-57
WPA/WPA2-TKIP and
WPA2-AES
WPA/WPA2-PSK “Configuring WPA/WPA2-
PSK” on page 4-57