WESM zl Management and Configuration Guide WT.01.28 and greater

4-70
Wireless Local Area Networks (WLANs)
Configuring a WLAN
Figure 4-41. Specifying the Syslog Server
5. In the Syslog Server IP field, specify the Syslog server’s IP address.
6. In the Syslog Server Port field, enter your server’s UDP port or keep the default
514.
7. Click the OK button.
8. In the WLAN’s Edit screen, click the OK button.
9. Click the Save link at the top of the Web browser interface to save the changes
to the startup-config.
Enabling RADIUS Accounting on a WLAN
To activate RADIUS accounting on a WLAN, follow these steps:
1. Select Network Setup > WLAN Setup > Configuration.
2. Select the WLAN from the list and click the Edit button. The Edit screen for the
WLAN is displayed.