WESM zl Management and Configuration Guide WT.01.28 and greater

4-76
Wireless Local Area Networks (WLANs)
Configuring a WLAN
Figure 4-45. Enabling a WLAN
As long as you are operating in normal mode, all radios on all RPs that the Wireless
Edge Services zl Module has adopted or will adopt support the enabled WLANs.
You can confirm that RPs are actually supporting the enabled WLANs by selecting
Network Setup > Radio and checking the WLAN Assignment tab. Select an RP radio
to view which SSIDs are mapped to that radio’s BSSIDs.
The radio also adds the enabled WLANs to the WLAN assignment for default radio
adoption configurations, which you can view by selecting Network Setup > Radio
Adoption Defaults and clicking the WLAN Assignment tab.
For example, Figure 4-46 shows the default configuration after you enable the five
WLANs shown in Figure 4-45.