WESM zl Management and Configuration Guide WT.01.28 and greater

4-95
Wireless Local Area Networks (WLANs)
Traffic Management (QoS)
Figure 4-55. Enabling WMM on a WLAN
2. Under Advanced, in the Access Category drop-down menu, select Automatic/
WMM.
3. Click the OK button.
The next section explains how to make some advanced configurations for WMM.
Changing the Protocol that Prioritizes Traffic and Enabling
Admission Control
As discussed earlier, when you enable WMM, wireless devices queue frames accord-
ing to QoS marks. The default protocol for the QoS mark is 802.1p. However, you
can change the protocol to DSCP by accessing advanced WMM parameters.
Enable WMM