WESM zl Management and Configuration Guide WT.01.28 and greater

4-102
Wireless Local Area Networks (WLANs)
Traffic Management (QoS)
Figure 4-60. Editing Station EDCA (WMM) Parameters
3. View the SSID and Access Category settings to verify that you are configuring
the correct queue. In Figure 4-60, the Best Effort queue (queue 1) in MyWLAN
is being customized.
4. Enter the desired values in the AIFSN, Transmit Ops, CW Minimum, and CW
Maximum fields.
The values for the AIFSN and Transmit Ops are in ms. The CW Min and CW
Max values are determined by raising 2 to the power of the value in the
corresponding field and subtracting one. For example, if you enter 4 in the CW
Minimum field, the CW Min value is 15. (Setting the CW Min and CW Max
values in this way forces you to specify values allowed by WMM.)