WESM zl Management and Configuration Guide WT.01.28 and greater

4-104
Wireless Local Area Networks (WLANs)
Traffic Management (QoS)
Like other radio settings, you can alter:
■ the WMM queue parameters that the Wireless Edge Services zl Module sends
to newly adopted radios
■ the WMM queue parameters used by particular radios
To customize the RP WMM parameters, complete these steps:
1. Choose whether you are configuring parameters for any newly adopted radio or
for a particular radio:
• To configure settings for any newly adopted radio, select Network Setup >
Radio Adoption Defaults.
• To configure settings for particular radios, select Network Setup > Radio.
2. Click the WMM tab. On the screen that is displayed (see Figure 4-62), queues
are listed depending on the configuration type:
• For the radio adoption default configurations, queues are listed on the screen
by radio type and access category—for example, 802.11a and Background.
• If you are configuring WMM settings for particular radios, queues are
indexed according to radio number and queue number. For example, in
Figure 4-62, the Voice queue for radio 1 would be indexed 1/4.