WESM zl Management and Configuration Guide WT.01.28 and greater

4-105
Wireless Local Area Networks (WLANs)
Traffic Management (QoS)
Figure 4-61. Network Setup > Radio > WMM Screen
3. To change the parameters for a particular queue, select the queue and click the
Edit button. The Edit WMM screen is displayed.
Figure 4-62. Edit WMM Screen for Radio 1’s Voice AC
4. To change the AIFSN value, enter a new value between 0 and 15 in the AIFSN
field. This value is in ms.
5. To change the Transmit Ops value, enter a new value between 0 and 65,535 in
the Transmit Ops field. This value is in ms.
6. To change the CW Min, enter a new value between 0 and 15 in the CW Minimum
field. The CW Min is 2 to the power of this value, minus 1, in ms. For example,
if you enter 3, then the CW Min is 7 ms.
7. To change the CW Max, enter a new value between0 and 15 in the CW Maximum
field. The CW Max is 2 to the power of this value, minus 1, in ms.
8. Click the OK button.