WESM zl Management and Configuration Guide WT.01.28 and greater

5-16
Web Authentication for Mobile Users
Configuring Web-Auth
Configuring Internal Web-Auth Pages
At its factory default settings, the Wireless Edge Services zl Module includes three
pages for Web-Auth. See “Web Pages for the Login Process” on page 5-6 for
descriptions and illustrations of these default pages.
You can customize the text and add your company’s logo to the default pages.
Follow these steps:
1. Complete the steps described in “Configuring Web-Auth” on page 5-10.
2. You should be in the Web-Auth screen for the WLAN. Select Internal from the
drop-down menu at the top of the screen.
3. Under Internal (Generated) Web Page, click the Login tab to configure the login
page, which users see when they try to access your network services. (See
Figure 5-9.)
a. In the Title Text field, accept the default text shown on the screen, or enter
the text that you want to use.
b. In the Header Text field, accept the default text shown on the screen, or enter
the text that you want to be displayed at the top of the login page. (See
Figure 5-10.)
Note If you customize the Header Text, Footer Text, or Descriptive Text fields, you can
enter a maximum of 1,024 characters.
c. In the Footer Text field, accept the default text shown on the screen, or enter
the text that you want to be displayed at the bottom of the login page. (See
Figure 5-10.) For example, you might want to enter:
Call the IT department at ext. 1253 to receive a valid username and pass-
word.
d. In the Small Logo URL field, enter the name of a logo file to include a small
logo on the login page. (See Figure 5-10.) You must copy this logo to the
flash on the Wireless Edge Services zl Module. (For instructions on how to
copy the logo file to flash, see “Copying Logo Files to the Module’s Flash”
on page 5-33.)