WESM zl Management and Configuration Guide WT.01.28 and greater

5-33

Web Authentication for Mobile Users

Copying Logo Files to the Module’s Flash

If you want to display your company’s logo on the Web-Auth login, welcome, or

failed page, you must copy the logo file to the appropriate directory on the Wireless

Edge Services zl Module’s flash.

The module’s flash contains a hotspot directory that, in turn, contains a subdirectory

for each WLAN on the module. To display a logo on one of the Web-Auth pages,

you must copy the logo file to the hotspot subdirectory for the WLAN that you are

configuring. For example, if you are configuring Web-Auth as the authentication

method for WLAN 2, you must copy your company’s logo file to the /hotspot/wlan2

directory in the module’s flash. If you are configuring Web-Auth for WLAN 1, you

must copy your company’s logo file to the /hotspot/wlan1 directory.

To copy the logo file to the appropriate directory for the WLAN that you are

configuring, you can use either an FTP or TFTP server. Copy the logo file to the FTP

or TFTP server, and then complete these steps:

1. Select Management > System Maint.—Config Files.

2. Click the Transfer Files button at the bottom of the screen. The Transfer screen

is displayed. (See Figure 5-23.)

Figure 5-23. Management > System Maint.—Config Files > Transfer Screen