WESM zl Management and Configuration Guide WT.01.28 and greater

5-34
Web Authentication for Mobile Users
Copying Logo Files to the Module’s Flash
3. Specify the source for the file transfer:
a. In the From field under Source, use the drop-down menu to select Server.
b. In the File field, enter the name of the logo file.
c. In the Using field, use the drop-down menu to select either FTP or TFTP.
d. In the IP Address field, enter the IP address of the FTP or TFTP server.
e. If you are using an FTP server, enter the login credentials.
i. In the User ID field, enter the username for the FTP server.
ii. In the Password field, enter the password for this username.
f. In the Path field, enter the path where the configuration is saved on the
server. If you are using an FTP server and the logo file is saved at the server’s
root level, enter a period followed by a slash (./). If the logo file resides at
a different level on the FTP server, enter the complete path. (If you are using
a TFTP server, this field may not be required.)
4. Specify the destination as the Wireless Edge Services zl Module:
a. In the To field under Target, use the drop-down menu to select Wireless
Services Module.
b. In the File field, enter the hotspot directory, the WLAN subdirectory, and
the name of the logo file. Use the following syntax:
/hotspot/<WLAN subdirectory>/<logo filename>
Replace <WLAN subdirectory> with the subdirectory for the WLAN that
you are configuring, and replace <logo filename> with the filename that
contains your company’s logo. For example, if you are configuring
Web-Auth as the authentication method for WLAN 3, you would enter:
/hotspot/wlan3/logo.gif