WESM zl Management and Configuration Guide WT.01.28 and greater

6-15
IP Services—IP Settings, DHCP, and DNS
IP Routing
6. Click the OK button to apply the change to the running-config.
7. Click the Save link at the top of the Web browser interface to save the changes
to the startup-config.
To delete a route, select the route from list in the Network Setup > Internet Protocol
> IP Forwarding screen. Then click the Delete button.
Specifying a Default Route and Gateway
A default route is a special static route that applies to all traffic for which the Wireless
Edge Services zl Module does not know another route.
When you use the CLI to configure the Wireless Edge Services zl Module’s default
gateway, the module automatically creates a default route to that gateway. This route
is listed in the Network Setup > Internet Protocol > IP Forwarding screen. (See
Figure 6-10.)
Figure 6-10. Viewing the Default Route
Default route
Default gateway