WESM zl Management and Configuration Guide WT.01.28 and greater

6-36
IP Services—IP Settings, DHCP, and DNS
DHCP Server
Figure 6-24. Configuring Global DHCP Settings
2. Check the Ignore Bootp box to configure the module to ignore BOOTP requests.
Checking the box allows the BOOTP requests to continue on to a BOOTP server.
3. Enter a value from 1 through 10 seconds in the Ping time interval field.
The default setting is 1 second.
4. Click the Apply button.
Configuring Extended DHCP Options
The Wireless Edge Services zl Module allows you to configure extended DHCP
options for both network and host pools. For example, in addition to assigning clients
a DNS server address, you might want to assign them a Network Time Protocol (NTP)
server address. An NTP server address is defined through option 42.
To configure extended DHCP options, you first define globally which extended
option or options you will use. Next, you configure values for these options in
particular network or host pools.