WESM zl Management and Configuration Guide WT.01.28 and greater

6-37
IP Services—IP Settings, DHCP, and DNS
DHCP Server
Setting Up Global Options
To define the extended options to be used by your DHCP server, complete these steps:
1. Select Network Setup > DHCP Server > Configuration.
2. Click the Options Setup button. The Global Options screen is displayed.
Figure 6-25. Global Options Screen
3. Click the Insert button.
4. Enter an alphanumeric string in the Name field to identify the option.
The string cannot include special characters or spaces. If you include such
characters, you will receive this message when you click the OK button: Failed
to save - Option name has invalid characters
Some option names are reserved for DHCP options automatically enabled on
the Wireless Edge Services zl Module. You cannot use the names listed in
Table 6-1.
Table 6-1. Names Not Allowed for Global DHCP Options
Reserved Names
subnet-mask
routers
domain-name-servers
domain-name
broadcast-address
netbios-name-servers
netbios-node-type
bootfile-name