WESM zl Management and Configuration Guide WT.01.28 and greater

6-38
IP Services—IP Settings, DHCP, and DNS
DHCP Server
5. In the Code field, enter a value between 0 and 254. You should enter the standard
code for the option that you are defining.
Again, some DHCP codes are reserved for the DHCP options configured when
you set up the pool. You cannot alter the codes listed in Table 6-2.
Table 6-2. Codes Not Allowed for Global DHCP Options
6. The Typ e drop-down menu includes two options: ip and ascii.
The setting that you select determines the type of value that you enter when you
actually configure the option in a pool. (See “Specifying the Value for an
Extended Option in a DHCP Pool” on page 6-39.)
In this example, you are setting up an option to specify an IP address for an NTP
server, so you select ip. Selecting ascii allows you to enter alphanumeric
characters for the option.
user-class
next-server
dynamic-bootp
Reserved
Code
Associated Option
1 subnet mask
3 router
5 name server
6 domain name server
15 domain name
28 broadcast address
44 Netbios name server
46 Netbios node type
67 bootfile
77 userclass
119 dns list
Reserved Names