WESM zl Management and Configuration Guide WT.01.28 and greater

7-12
Access Control Lists (ACLs)
Configuring ACLs
The numeric value of the ACL ID does not affect the precedence of ACLs.
However, precedence is important for the rules inside of a particular ACL; you
will set these precedence values later when you configure ACL rules.
5. Click the OK button. The ACL is now listed in the ACLs section of the Security
> ACLs > Configuration screen.
Figure 7-3. Security > ACLs > Configuration with ACL
Configuring Rules for ACLs
After you create an ACL, you must add rules to it. These rules actually select and
control the traffic.
For each ACL rule, you must specify the following:
■ the rule’s precedence
■ the operation (deny, permit, or mark) that the Wireless Edge Services zl Module
performs on selected packets
■ the filters that select a packet or frame according to fields in the header