WESM zl Management and Configuration Guide WT.01.28 and greater

8-37
Configuring Network Address Translation (NAT)
Configuring NAT
Figure 8-22. Security > NAT > Status Screen
Each active session to which the Wireless Edge Services zl Module has applied NAT
is displayed in a row. The screen columns show the IP addresses associated with the
session:
■ Inside-Global—the source IP address as it appears in the destination device’s
network
■ Inside-Local—the source IP address as it appears in the source device’s network
■ Outside-Global—the destination IP address as it appears in the destination
device’s network
■ Outside-Local—the destination IP address as it appears in the source device’s
network
For example, if you have configured dynamic source NAT on inside traffic, the
Inside-Local column lists the IP address of the source device in the inside network.
The Inside-Global column lists the translated IP address. (See the top row in Figure
8-22.)